Features : 4Band EQ
Input Impedance : 2.2MoΩ
Frequency Response : 20Hz~20KHz
Bass : +/-12dB at 60Hz
Middle : + /-12dB at 500Hz
Treble : +/-12dB at 10KHz
Presence : +/-12dB at 8KHz
Battery Check S/W
Battery Life : Over 700Hours
Power Supply : 9v Alkaline Battery
Pick-up : Piezo ceramic pick-up
Dimension : W50mm X L76mm ( 1.96”X 2.83” )
6.LOW BATT. (LOW BATTERY LED LIGHT)
7.CHROMATIC TUNER LED DISPLAY
8. CHROMATIC TUNER ON BUTTON
The VOLUME controls the output volume. At “0” it is completely
OFF. At “12” it is LOUD!
2. BASS (for bass tones)
3. MIDDLE (for midrange tones)
4. TREBLE (for high tones)
5. PRESENCE (for very high tones)
The BASS, MIDDLE, TREBLE, and PRESENCE controls are a 4-band equalizer for controlling tone.
The BASS TREBLE and PRESENCE tone controls are normal boost / cut shelving controls.
The MIDDLE (midrange) tone control is a normal boost / cut tone filter.
The center detent on these tone controls yields a flat tone response. “+12” boosts the tone; “-12“ cuts the tone.
6. LOW BATT. (LOW BATTERY LED LIGHT)
The LED will light when the battery has lost power. Replace the battery when this light is on.
This LED light will flash when a cable is connected to the outputjack of the pickup system. This shows the battery is good.
A 9-volt battery powers the B-Band M450T preamp. Before connecting the instrument to an amplifier or mixer please check that a fully charged 9-volt battery is connected.
7. CHROMATIC TUNER
8.TUNER ON / OFF BUTTON